– Truly biometric identification inside of access controller Users place fingerprints on reader, and access controller verifies the biometric data transferred from RS485 reader directly. – Supports external SD Card for database back-up inBIO460 is standard with SD Card slot, it enhances events capacity and protects database missing. – 800m distance between RS485 reader and controller at least It is steadily compatible working with RS485 fingerprint reader, and enhances the communication distance to 800m at least. – Quietly brilliant to know about controllers working state by LED indicators There are five LED indicators on the housing of inBIO460; they indicate whether power is on , whether controller runs steadily, whether the identification is valid, and whether data is transferred from RS485 readers normally. – Easy to remotely control and know the status of any door Users may remotely close or open the door anywhere on software and know the status on e-map -Video surveillance linkage Pre-setting video surveillance linkage function on software, illegally operating on reader would active the camera to take photo or record video immediately. – Multiple hardware protection measure There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal. – Integration with Other Security Systems InBIO460 can be integrated with other security systems such as CCTV, fire alarm, BAS (building automation system) and other systems to configure total security system. -Supports different wiegand reader The controller supports different wiegand format, and can connect to different reader, including ID card reader, MF card reader and HID card reader -Input/Output Ports to Control Doors Connect with variety of sensors, alarms, exit buttons, electric lock and other devices. -Variety of Communication Function Using either serial or TCP/IP communication, it provides reliable network system -B/S structure software It is easy to manage the system by browser from client PC. There is no need to install software on each client. -Normal open after first punch card can be setup -Real-time Monitoring of Door status Using the management software, it allows real-time monitoring and control of door opening and closing of the whole system. -Simple Access Control System Configuration -Interlock function Link different doors with special logic that one door is Open, others should be closed. -Multi-card operation This function is used to manage visitors or to manage some special high secure place. The doors are opened when appointed number registered cards are read together. -Anti-Passback -Duress Mode -SDK available The system integrator can use the SDK to integrate the hardware into their existing access control software system or to develop a new software. Specifications:
|CPU||32bit MIPS CPU|
|Flash Memory||128M bits|
|SD card backup||Support|
|Power / Current||DC 9.6V-14.4V, Rated Max.1A|
|Wiegand Reader Port||4ea (26bit Wiegand, 8bit Burst for PIN)|
|RS485 Reader Port||1ea Extended RS485 Port|
|Baud Rate||38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)|
|Input Port||8ea (Exit Button#1, Door Sensor#1; Exit Button#2, Door Sensor#2; Exit Button#3, Door Sensor#3; Exit Button#4, Door Sensor#4)|
|Output Port||4ea (4 FORM-C Relay Output, SPDT 5A36VDC/8A30VAC)|
|4ea (4 Aux FORM-C Relay Output, SPDT 2A30VDC)|
|LED Indicator||Yes, LED indication for communication, power, status and punch card|
|Operating Temperature||0to +55C|
|Operating Humidity||10% to 80% relative humidity non-condensing|
|Dimension (H*W*D)mm||226*106*36(Single board) 400*330*90.5(with power supply and metal cabinet)|
CPU: 324MHz Sensor: ZK small-sized sensor Communication: RS485 Standard function: ID Card Module Optional function: MF Card Module Voice Prompt: Buzzer Working Voltage: 12VDC Working Temperature: 0~45 Dimension(W*H*D)mm: 50*102*37.3 Protection Grade: IP65 Image:
USB Fingerprint Sensor:
. High-performance, maintenance-free optical fingerprint sensor.
· Readily accessible for any finger.
· High quality industrial-class ABS plastic material with scratchproof texture surface.
· Removable weighted stand.
· High speed USB interface.
· LED indicates the status of the device.
· Driver CD included.
· Available SDK for secondary development .
* Pixel resolution: 500 dpi
* Supply Voltage: 5.0V +/- .25V supplied by USB
* Supply Current scanning: 170 mA (type.)
* Supply Current idle mode: 120 mA (type.)
* Supply Current suspend mode: 2 mA (max.)
* ESD Susceptibility: >15 KV
* Image data: 8-bit grayscale
* Temperature, Operating: 5- 35C
* Humidity, Operating: 20% – 80% non-condensing
* Temperature, Storage: -10- 60C
* Humidity, Storage: 20% – 90% non-condensing
* Standards Compliance: FCC Class B, CE, VCCI
* Applications for desktop PC security,mobile PCs, Custom applications, home and Office Use.